2 × 2000 kVA
10 / 0.4 kVDry cast transformers with aluminum winding in the base; copper winding is a separate option.
Visualization of design execution. The layout, inputs and facades are specified after approval of the single-line diagram.
Industrial transformer substation
2modular packaged transformer substation 4000 kVA / 10/0.4 kV
Project article: 2BKTP-4000-10-04
Two-transformer block substation with a total installed capacity of 4000 kVA: two dry transformers of 2000 kVA and two sections 0.4 kV switchgear.
Price on Request
Power is generated by two serial dry transformers of 2000 kVA. The sectional switch, automatic transfer switch and the admissibility of parallel operation are determined by the project. Price, climatic modification and EXW/FOB/DDP conditions are fixed after agreeing on a single-line diagram.
Technical Data
Model Specifications
Design parameters. The final configuration is confirmed by a single-line diagram and a technical and commercial proposal.
- Installed power
- 4000 kVA
- Transformer circuit
- 2 × 2000 kVA
- High/low voltage
- 10 / 0.4 kV, 50 Hz
- Transformer
- dry cast, connection diagram D/Yn-11 (Dyn11)
- Execution
- two-transformer 2modular packaged transformer substation in a modular building
- Serial basis
- Serial dry transformers Xinhuan 2000 kVA
- 10 kV switchgear
- complete switchgear with protection
- 0.4 kV switchgear
- two sections, a sectional apparatus and an automatic transfer switch - according to the project
- Relay protection
- microprocessor, operating range 45–55 Hz
- Commercial accounting
- accuracy class not lower than 1.0
- Engineering systems
- heating, ventilation, lighting, own needs
- Safety
- thermal protection, security and fire alarm, grounding
- Integration
- design and approval of connection diagram
- Delivery terms
- EXW / FOB / DDP Saransk - according to confirmed technical and commercial proposal
Model architecture
2 × 2000 kVA dual-transformer 2modular packaged transformer substation
Power is generated by two serial dry transformers of 2000 kVA. The sectional switch, automatic transfer switch and the admissibility of parallel operation are determined by the project.
Two sections 0.4 kV
about 2.89 kA per section 0.4 kVSectioning reduces the current of each section and allows load redundancy to be designed.
Production site
Assembly of cabinets and modules modular packaged transformer substation
Video provided by potential manufacturer during technical development. It shows the assembly of NKU, switching equipment and finished modules; the specific configuration of HELIKOR is confirmed by FAT.
Complete delivery
From 10 kV switchgear to distribution 0.4 kV
The substation is equipped as a factory module, and current-carrying parts are calculated based on actual power and short-circuit currents.
Reception 10 kV
KRU/KSO or compact switchgear with switching, protection, measurement and cable entries.
Conversion
2 × 2000 kVA in a safe modular design.
Distribution 0.4 kV
Busbars, incoming, sectional and outgoing devices are selected according to load, selectivity and short-circuit current.
Factory readiness
Heating, ventilation, auxiliary needs, thermal control and fire safety equipment are collected and checked before shipment.
Contents of the project supply
Equipment, module and engineering systems
The basic development includes 10 kV switchgear, dry transformer, 0.4 kV switchgear, microprocessor relay protection and automation, commercial accounting, auxiliary and thermal protection cabinets, ventilation, heating, lighting, grounding and fire alarm.
- 01Checking a single-line diagram and calculating currents
- 02Coordination of equipment, layout and climatic design
- 03FAT, supply, installation and input support
Engineering check
Devices 0.4 kV - only after calculation
Rated current: about 2.89 kA per section 0.4 kV. The rating of busbars, input and sectional devices is confirmed by the manufacturer based on transformers, permissible overload and short-circuit current.
Project equipment
Get the price, production time and delivery schedule
We will prepare an EXW/FOB or DDP offer to the site, disclosing the composition, logistics, duties, 22% VAT and unloading boundaries.