1 × 1200 kVA, design version
10 / 0.4 kVDry cast transformers with aluminum winding in the base; copper winding is a separate option.
Visualization of design execution. The layout, inputs and facades are specified after approval of the single-line diagram.
Industrial transformer substation
Modular packaged transformer substation 1200 kVA / 10/0.4 kV
Project article: BKTP-1200-10-04
Compact block substation for industrial, commercial and infrastructure facilities: 10 kV switchgear, dry transformer with a design capacity of 1200 kVA and 0.4 kV switchgear.
Price on Request
In the manufacturer's catalog, the closest standard size is 1250 kVA. The design for 1200 kVA and the permissible load are confirmed by the factory technical and commercial proposal. Price, climatic modification and EXW/FOB/DDP conditions are fixed after agreeing on a single-line diagram.
Technical Data
Model Specifications
Design parameters. The final configuration is confirmed by a single-line diagram and a technical and commercial proposal.
- Installed power
- 1200 kVA
- Transformer circuit
- 1 × 1200 kVA, design version
- High/low voltage
- 10 / 0.4 kV, 50 Hz
- Transformer
- dry cast, connection diagram D/Yn-11 (Dyn11)
- Execution
- single-transformer modular packaged transformer substation in a modular building
- Serial basis
- Design version 1200 kVA; closest standard size 1250 kVA
- 10 kV switchgear
- complete switchgear with protection
- 0.4 kV switchgear
- input and outgoing lines - according to rated current and short-circuit current
- Relay protection
- microprocessor, operating range 45–55 Hz
- Commercial accounting
- accuracy class not lower than 1.0
- Engineering systems
- heating, ventilation, lighting, own needs
- Safety
- thermal protection, security and fire alarm, grounding
- Integration
- design and approval of connection diagram
- Delivery terms
- EXW / FOB / DDP Saransk - according to confirmed technical and commercial proposal
Model architecture
1 × 1200 kVA, design version single-transformer modular packaged transformer substation
In the manufacturer's catalog, the closest standard size is 1250 kVA. The design for 1200 kVA and the permissible load are confirmed by the factory technical and commercial proposal.
One section 0.4 kV
about 1.73 kABusbars, input and output devices are selected according to the design current, selectivity and short-circuit current.
Production site
Assembly of cabinets and modules modular packaged transformer substation
Video provided by potential manufacturer during technical development. It shows the assembly of NKU, switching equipment and finished modules; the specific configuration of HELIKOR is confirmed by FAT.
Complete delivery
From 10 kV switchgear to distribution 0.4 kV
The substation is equipped as a factory module, and current-carrying parts are calculated based on actual power and short-circuit currents.
Reception 10 kV
KRU/KSO or compact switchgear with switching, protection, measurement and cable entries.
Conversion
1 × 1200 kVA, design design in safe modular design.
Distribution 0.4 kV
Busbars, incoming, sectional and outgoing devices are selected according to load, selectivity and short-circuit current.
Factory readiness
Heating, ventilation, auxiliary needs, thermal control and fire safety equipment are collected and checked before shipment.
Contents of the project supply
Equipment, module and engineering systems
The basic development includes 10 kV switchgear, dry transformer, 0.4 kV switchgear, microprocessor relay protection and automation, commercial accounting, auxiliary and thermal protection cabinets, ventilation, heating, lighting, grounding and fire alarm.
- 01Checking a single-line diagram and calculating currents
- 02Coordination of equipment, layout and climatic design
- 03FAT, supply, installation and input support
Engineering check
Devices 0.4 kV - only after calculation
Rated current: about 1.73 kA. The rating of busbars, input and sectional devices is confirmed by the manufacturer based on transformers, permissible overload and short-circuit current.
Project equipment
Get the price, production time and delivery schedule
We will prepare an EXW/FOB or DDP offer to the site, disclosing the composition, logistics, duties, 22% VAT and unloading boundaries.